Nature: Former Cleaner
GLOVE STRIP is an formulated emulsion texturing agent for brush-on or spray-on applications. The product can also be used as a cleaning agent.
GLOVE STRIP is an acid activated stripper. Care should be taken to use the product only in a well ventilated area. Do not allow contact on skin. If accidentally spilled on skin, flush with water.
Characteristics of Glove Strip:
• Will remove most unwanted inorganic stains.
• Easily rinsed from cleaned surfaces using water.
• Adheres to surfaces in a thick active coating allowing retention for better results.
• Give rubber surface a textured effect.
• Non-corrosive to most metals except magnesium and zinc.
Application
Apply by spraying on using low velocity equipment that does not atomize GLOVE STRIP.
GLOVE STRIP may be also applied by brushing on a heavy coating as follows :-
(a) Pour about 2 gallons in a suitable pail.
(b) Begin application on top surfaces using a bristle brush and work down.
(c) Replenish the material in the pail as needed.
Use water to rinse off residue once the effect is achieved.
Address
Phone